RaceQuip
Racequip 6 Point HNR Harness, Camlock, SFI 16.1, Pull Up Adjust, Bolt-On / Wrap Around, Individual Harness, Black
Racequip 6 Point HNR Harness, Camlock, SFI 16.1, Pull Up Adjust, Bolt-On / Wrap Around, Individual Harness, Black
RaceQuip’s 6-Point Pull Up Camlock Harness System features twin individual HANS / HNR style shoulder belts and has an SFI 16.1 Rating. The lightweight aluminum alloy cam buckle provides precise spring pressure for a positive feel when rotating the lever to the 45 degree (right or left) unlatch movement. This 6-pt HANS / HNR seat belt system also has a "pull up" lap belt design which means you pull the lap belt ends toward the cam buckle to tighten the belts. The cam buckle stays attached to the right-side lap belt when not in use. The dual crotch belt has two ends for mounting but uses only one mounting tab going into the cam buckle. This auto racing harness is manufactured using premium 3" polyester webbing that reduces to 2" above the shoulder adjusters and drop forged steel 3 bar slides and bolt on hardware ends. The double adjustable ends allow mounting as either wrap around or bolt-in. Shoulders adjust from 25" to 72" and lap belt adjusts from 30" to 70". NOTE: RaceQuip motorsports harness sets and seat belts are NOT D.O.T. / FMVSS 209/302 certified for on highway use. They are only to be used in racing vehicles off public streets and highways. All racing harness sets are designed to be mounted in a race vehicle to a roll cage or harness bar.
Features:
- NOT D.O.T. / FMVSS Certified for on Highway Use
- Premium 3"Â Polyester Webbing
- Pull Up Style Lap Belt
- 6 Point Design - Dual 2" Crotch Strap
- 3" Hardware Ends Installed
- Double Adjustable for Ease of Installation
- Wrap Around or Bolt-in Mounting
- Drop-Forged Steel Hardware
- Shoulders Adjust from 25" to 72"
- Lap Belt Adjusts 30" to 70"
- Twin Individual HANS / HNR Shoulder Belts
- Lightweight Aluminum Alloy Cam Buckle
- Wide Engagement Cone For Easy Snap In
- Precise Spring Pressure for a Positive Feel
Couldn't load pickup availability
Materials
Materials
Material Selection Guide
We offer 4 materials for our numbers, letters and panel numbers: Magnetic, Reusable Vinyl, Permanent Vinyl and Static Cling. They are designed for use on different types of cars and for different kinds of use
Magnetic
Magnetic material is the most durable removable product we sell. It works well for application on ferrous bodies cars at speeds generally below 70 MPH. It can be used for higher speeds, but may have a tendency to blow off.
PROS:
- Durable
- Lasts decades.
- Easy to clean
CONS:
- Can lose flexibility in cold weather (should be put on hood in sunlight to warm up when using at events under 45 degrees)
- Limited to approximately 70mph. If using at speeds higher than this, it is recommended to apply a small piece of tape to the leading edge to avoid blowing off.
- Does not adhere to non ferrous cars (Corvette, Lotus)
Reusable Vinyl
SOLOTIME reusable vinyl products allow you to apply temporary numbers to your car and reuse them event after event. The material is extra thick (about 8-12mils, compared to 2-3 for a regular decal)which helps prevent tearing or stretching the numbers when they are removed.
The low tack adhesive numbers come on a paper backing that allows you to store them between events.
PROS:
- Adheres to any smooth surface (including windows)
- Will stay on at any speed.
- Works in any temperature.
CONS:
- Must be put back on backing paper in between uses.
- Must be put on a clean car and adhesive must be kept clean.
- Typical users get between 6-18 uses.
Permanent Vinyl
Click to see the installation instructions for this material
"Permanent" vinyl material is your typical material that ny pre made decal or sticker would be made with. It can be removed, but will be destroyed in the process of removal.The permanent vinyl is high quality 5-7 year rated outdoor material.
PROS:
- Very long lasting.
- Will stay on at any speed.
CONS:
Cannot be removed without destroying
Static Cling
Click for the static cling installation instructions.
SOLOTIME static cling products are autocross tested and work well for low speed events. These products cling to most smooth surfaces, such as fiberglass, plastic, steel, or aluminum. They even cling to glass!
Each reusable static cling number or letter comes with a special paper backing that keeps them ready for the next autocross event. Special Note: Please test these numbers on your vehicle before you use them at a racing event.
Unlike strong magnets or adhesives, static cling products may blow off your vehicle during unusual racing or weather conditions. We recommend that you order extra numbers as a precaution.
- Inexpensive
- Works on any smooth surface
CONS:
- Must be applied very carefully.
- Comes in white only and is not available as a base for panel/meatball numbers.
- May come off during wet events.
Shipping & Lead Times
Shipping & Lead Times
Non graphics items:
- These items typically ship within 24 hours of ordering.
- Backorders: In the event that an item that you order is on backorder, we will contact you with expected time of delivery to determine if you would like to wait, cancel your order or substitute an alternate item.
- Our shopping cart automatically charges your credit card at time of order placement. If the item is backordered for more than 5 days, we can (upon request) remove the authorization from your card until the item ships. Special Orders,
-Graphics Items:
Almost all numbers, panels and pre spaced lettering is custom made to your order. In order to accommodate your needs, we offer the following shipping and production terms:
STANDARD 5-14 DAY PRODUCTION AND DELIVERY
- This option is standard delivery and production time and will deliver your order in 5-14 days after you order. Please note that during busy times (March through July) delivery time will tend to be towards the longer end of the scale.
NEXT WEEKEND (Approx 7 day) PRODUCTION AND DELIVERY
- For orders placed before 11AM CT on the previous Wednesday, we offer OPTIONAL "Next Weekend" delivery. For example, if you ordered on Wednesday of Week 1 using this option, you could expect to receive the order no later than Friday of the FOLLOWING week (week 2 -9 days later).
- We will produce your order as quickly as possible and deliver it using the best method possible to arrive on or before Friday of the following weekend.
- Please note that shipping carriers can deliver anytime between 10am and 7pm during the day.
- SPS does not ship "Signature Required" but we have no control if the carrier requires a signature at delivery and are not liable for any delays once the shipment leaves our dock.
THIS WEEKEND PRODUCTION AND DELIVERY (ORDER BY WED. 11 AM CT)
- For orders placed before 11AM CT on Wednesday, we offer OPTIONAL "This Weekend" delivery.
- We will produce your order as quickly as possible and deliver it using the best method possible to arrive on or before Saturday.
- Please note that shipping carriers can deliver anytime between 10am and 7pm during the day.
- SPS does not ship "Signature Required" but we have no control if the carrier requires a signature at delivery and are not liable for any delays once the shipment leaves our dock.
1 DAY RUSH PRODUCTION AND SHIPPING (ORDER BY 11AM CT)
- Our fastest option, this delivery method will get your order produced and shipped within 1 day if ordered before 11AM CT.
- We will ship Overnight via the best method for next day delivery.
- Please note, overnight delivery carriers deliver by 3:00PM. We do NOT deliver on Saturday or "First Delivery 10:30am" on this method, please contact us if you need these options.
